-
Water Flow Hall Sensor Control Switch Fluid Flow Meter
Brand Generic Power Source Battery Powered Manufacturer INNOVATION RESEARCH AND DEVELOPMENT ₹350.00 -
5v 1 Channel Relay Module Compatible With 5v Microcontroller
- 5V relay
- can be used as a microcontroller development board module can be used as a home appliance control
- 5 V-5v TTL control signals
- control DC or AC signal can control the 220V AC load
- the increase in transistor drive a relay coil, control pins high impedance
- the control pins with pull-down circuit, prevent floating relay malfunction
₹120.00 -
L293D Motor Driver Module for Dc Motor/Stepper Motor Driver
Driver Model
L293D
Operating Voltage(VDC)
4.5 to 12
Peak Current (A)
600 mA
No. of Channels
1
Cooling Fan
NO
Arduino Shield
No- can be used with Wire connection
Polarity Protection
NO
Dimensions in mm (LxWxH)
48 x 34 x 14
Weight (gm)
15
₹160.00 -
KY-037 Sound Detection Sensor Module for all devlopment board
- The output effective signal is low level
- The module has two outputs: AO and DO.
- Working voltage: DC 3.3-5V
- Microphone sensitivity (1Khz): 52-48dB
- Outputs digital switching output (high and low level 0 and 1
₹120.00 -
POWER BANK CHARGING MODULE CIRCUIT
Power 5V DCBoard Type Double sidedCharging display intelligent digital displayBatteries Type liquid lithium-ion batteries (18650)Product Size 57mm x 28mmScreen size 27mm x 17mm₹160.00 -
LM393 Photosensitive Light-Dependent Control Sensor – LDR Light Sensor Module
Brand Robotbanao Manufacturer Robotbanao Country of Origin India Model number 78-O4QP-54VO Colour Blue Number of Memory Sticks 1 Item Weight 100 g ₹100.00 -
TP4056 C-Type – 18650 Lithium-ion Battery Charging Module
- Input interface: Type C
- Current Protection: Yes
- Charging mode: Linear charging.
- Current: 1A adjustable.
- Input voltage: 4.5V-5.5V.
- Full charge voltage: 4.2V
₹100.00 -
Thermocouple Sensor J Type with 2 meter cable
A Thermocouple is a sensor used to measure temperature. Thermocouples consist of two wire legs made from different metals. The wires legs are welded together at one end, creating a junction. This junction is where the temperature is measured. When the junction experiences a change in temperature, a voltage is created. The voltage can then be interpreted using thermocouple reference table to calculate the temperature.
₹100.00 -
NodeMcu Lolin ESP8266 CH340G WiFi Development Bord Module with USB Cable
Item Weight 800 g
Item part number ESP8266
Connectivity technologies Wi-Fi, USB, I2C
Other display features Wireless
Manufacturer Generic / OEM
Item Weight 800 g₹499.00 -
WiFi Module – ESP8266
802.11 b/g/n
Wi-Fi Direct (P2P), soft-AP
Integrated TCP/IP protocol stack
Integrated TR switch, balun, LNA, power amplifier and matching network
Integrated PLLs, regulators, DCXO and power management units
+19.5dBm output power in 802.11b mode
Power down leakage current of <10uA₹745.00WiFi Module – ESP8266
₹745.00 -
LM 35 Temperature Sensor
Model number LM_35
Number of Memory Sticks 1
Item Weight 400 g
Product Dimensions 7 x 5 x 5 cm; 400 g
Item model number LM_35
Item Height 50 Millimeters
Item Width 50 Millimeters₹179.00LM 35 Temperature Sensor
₹179.00
