-
5V 1 Channel Relay Module
- Trigger Voltage: 5 VDC
- Trigger Current : 20 mA
- Maximum Switching Voltage: 250VAC@10A; 30VDC @10A
- Single Pole Double Throw (SPDT) Configuration
- Power supply indicator lamp
₹39.005V 1 Channel Relay Module
₹39.00 -
L298D Motor Driver Module For
- Double bridge unit H
- Chip L298N (new ST)
- logical voltage 5 V
- Drive voltage 5 V-35 V
- Logic current 0mA-36mA
- Drive current 2A (maximum single bridge)
- Storage temperature-20 to + 135
- Maximum power 25 W
- Weight 30g
- Size: 43 * 43 * 27mm
₹400.00L298D Motor Driver Module For
₹400.00 -
L293D Motor Driver Module with IC
- Wide supply voltage: 4.5 V to 12 V.
- Max supply current: 600 mA per motor.
- The driver two holes of 3 mm dia.
- Male burg-stick connectors for supply, ground and input connection.
- Screw terminal connectors for easy motor connection.
- High noise immunity inputs.
₹289.00 -
5V 2A Power Bank Charging Module
Package Dimensions 20 x 15 x 5 cm Special features LED Indicator Lights Colour Blue Battery Power Rating 20000 Milliamp Hours Manufacturer Indian Hobby Center Country of Origin India ₹125.005V 2A Power Bank Charging Module
₹125.00 -
Single USB 5V Powerbank Module
- Voltage: 5V
- Type: Dual USB
- Output Current: 1A to 2.4A
- Best For: DIY
- Include: Charging port, LED
₹49.00 -
TP4056 1A Li-Ion Battery Charging Protection Module
Input voltage 5V Maximum charge current 1000mA Charging cut-off voltage 4.2V ± 1% OverCurrent Protection 3A Over-Discharge Protection 2.5V Dimensions 3 x 2 x 1cms Weight - 5 grams
₹24.00 -
TEC1-12706 THERMOELECTRIC PELTIER COOLER MODULE 12V 6A
- Model number: TEC1-12706
- Operating Voltage: 12V
- Maximum Voltage- Umax (V) : 15V
- Maximum Current- Imax (A) : 6A
- Maximum Output Power: 55 W
- Dimensions: 40 * 40 * 3.6mm
- Cable Length: 15 cm
- Quality tested cooling cells. We have carefully selected the Peltiers from the best manufacturers for the best cooling and efficiency
- Solid-state, vibration-free, noise-free. Traditional heat pumps are bulky and have moving parts
- Simple to install and operate
- Should use with a heat sink
₹629.00 -
W1209 Digital Temperature Controller Thermostat Module
- Temperature Control Range: -50 ~ 110 C
- Resolution at -9.9 to 99.9: 0.1 C
- Resolution at all other temperatures: 1 C
- Measurement Accuracy: 0.1 C
- Control Accuracy: 0.1 C
- Refresh Rate: 0.5 Seconds
- Input Power (DC): 12V
- Measuring Inputs: NTC (10K 0.5%)
- Waterproof Sensor: 0.5M
- Output: 1 Channel Relay Output,
- Capacity: 10A
₹999.00 -
DHT11 – Temprature and Humidity Sensor Module
- Power Supply： 3.3~5.5V DC
- Output： 4 pin single row
- Measurement Range： Humidity 20-90%RH， Temperature 0~50℃
- Accuracy： Humidity +-5%RH， Temperature +-2℃
- Resolution： Humidity 1%RH， Temperature 1℃
- Interchangeability： Fully Interchangeable
- Long-Term Stability： <±1%RH/year
₹400.00 -
BMP180 Barometric Pressure Sensor Module
- Vin: 3 to 5VDC
- Logic: 3 to 5V compliant
- Pressure sensing range: 300-1100 hPa (9000m to -500m above sea level)
- Up to 0.03hPa / 0.25m resolution
- -40 to +85°C operational range, +-2°C temperature accuracy
- This board/chip uses I2C 7-bit address 0x77.
₹500.00 -
LDR Light Sensor Module
- With fixed bolt hole for easy installation
- Small board PCB size: 3cm * 1.6cm
- Power indicator (red) and the digital switch output indicator (green)
- Using LM393 comparator chip, stable
₹120.00LDR Light Sensor Module
₹120.00 -
Flame Sensor infrared Receiver Ignition source detection module
Output Channel 1 Operating Voltage (VDC) 3.3 ~ 5 Mounting Hole(mm) 3 Length (mm) 32 Width (mm) 14 Weight (gm) 3 ₹229.00
